Gulf of Mexico – BP Video Shows Oil Spewing

    9

    Gulf of Mexico – Video released by BP shows oil spewing from a yellowish, broken pipe 5,000 feet below the surface. The oil looks like steam rushing from a geyser.

    The video released Wednesday gives a not-yet-seen glimpse of the leaking well a mile underwater. The stream occasionally can be seen becoming lighter as natural gas mixes into the gusher.

    Natural gas has been flowing from the well since the beginning. BP’s Doug Suttles says the rate natural gas has been flowing out hasn’t changed in the 21 days since the Deepwater Horizon exploded in the Gulf of Mexico.

    Follow VosIzNeias For Breaking News Updates



    Entertaining Videos and Delicious Recipes on Kosher.com



    9 COMMENTS

      • “Someone” cannot just go down there. The water pressure a mile down in the Gulf is about 5 tons per square inch as opposed to 14 pounds on land. Anyone trying would be crushed to death.

        BP and TO have been using robotic submersible vehicles to try positioning the various steel and concrete containment boxes over the gusher. This is considerably less precise than having real hands down there. There is a lot of engineering on the fly going on. Hopefully, the lessons learned will go a long way to help better contain blowouts in the future.

      • What do you think they have been trying to do for the past month?!
        Plus, its not just this 1 location, there are other parts of the pipe that have broken.
        Its a mile below the surface, not something that you can just lean off the boat & connect. Apart from the pressure of the water above & around you, there is also the pressure of the oil leaking out. I dont know the size of the pipe – difficult to get a scale from the video clip but its probably a lot larger than your garden hose.

          • They weren’t getting anything. This well was being drilled at the time of the blowout so no production was taking place. Interestingly, BP’s intent was to “tap and cap” the well. I.E. once the well was drilled and the oil accessed they planned on plugging the hole until a semi-submersible pumping station could be obtained and moved into place. It does appear that they’ve had to alter their plans substantially.

    1. The pressure of the oil is to great, plus the water is probally so filthy that it’s impossible to see. It seems to be that a pipe 1 mile long or the depth of the leak needs to be attatched to the leak. I don’t know if that’s possible

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here